Cleaning, Care; Cleaning Motorcycle - KTM 990 ADVENTURE EU Owner's Manual

CLEANING, CARE

Cleaning motorcycle

17.1
Note
Material damage Damage and destruction of components by high-pressure cleaning equipment.
–
Never clean the vehicle with high-pressure cleaning equipment or a strong water-jet. The excessive pressure can penetrate electrical
components, socket connects, throttle cables, and bearings, etc., and can damage or destroy these parts.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
If you clean the motorcycle regularly, its value and appearance will be maintained over a long period.
Avoid direct sunshine on the motorcycle during cleaning.
–
Close off the exhaust system to keep water from entering.
–
First remove coarse dirt particles with a gentle water spray.
–
Spray very dirty areas with a normal motorcycle cleaner and then clean with a paint-
brush.
Motorcycle cleaner (
Info
Clean the vehicle using warm water containing normal motorcycle cleaner and a
soft sponge.
401061-01
If the vehicle was operated in road salt, clean it with cold water. Warm water
would enhance the corrosive effects of salt.
p. 213)
174