Checking The Rear Hub Rubber Dampers - KTM 990 ADVENTURE EU Owner's Manual

WHEELS, TIRES

Checking the rear hub rubber dampers

12.5
Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They eventually wear out during
operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub will be damaged.
x
Preliminary work
–
Raise the vehicle using the center stand. (
–
Remove the rear wheel.
Main work
–
Check the rubber dampers
» If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
100572-10
–
Lay the rear wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check the play
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
» If clearance
100573-10
x ( p. 116)
of the rear hub for damage and wear.
1
, hold the rear wheel tight and try to rotate the rear sprocket.
A
larger than the specified value:
A
p. 76)
≤ 5 mm (≤ 0.2 in)
120