The router supports these modulations: G.Lite, T1.413, G.DMT, ADSL2,
ADSL2+ and Auto-Syno Up. The router negotiates the modulation modes
with the DSLAM.
The following table describes the parameters and buttons of this page:
Field
ADSl Mode
ADSL Type
5.6. Access Management
In the navigation bar, click Access Management. The Access Management
page that is displayed contains ACL, Filter, SNMP, UPnP, DDNS and CWMP.
5.6.1.
ACL
Choose Access Management > ACL, and the page shown in the following
figure appears. The user may remotely access the ADSL Router once his IP
has been set as a Secure IP Address through selected applications. With the
default IP 0.0.0.0, any client would be allowed to remotely access the ADSL
Router.
Choose Auto Sync-Up, ADSL2+, ADSL2, G.DMT, T1.413 or
G.lite. The default is Auto Sync-Up.
Choose ANNEX A, ANNEX I, ANNEX A/L, ANNEX M or
ANNEX A/I/J/L/M.
Description
77