Table of Contents
Advertisement
Field
IP Subnet Mask
Gateway
NAT
Dynamic Route
Direction
Multicast
IPv6 Options
IPv6 Address
IPv6 Default
Gateway
IPv6 DNS Server1
IPv6 DNS Server2
MLD Proxy
Dual Stack Lite
Enable
You can enter the IP subnet mask for dial-up, which
is provided by your ISP.
You can enter the gate way IP for dial-up, which is
provided by your ISP.
Select
whether
Translation (NAT) function. If you do not enable NAT,
you must add a route on the uplink equipment,
otherwise Internet access will fail. Normally NAT is
enabled.
You can select RIP1, RIP2-B or RIP2-M.
You can select None, Both, IN Only or OUT Only.
IGMP (Internet Group Multicast Protocol) is a
session-layer protocol used to establish membership
in a multicast group. The ADSL Router supports both
IGMP version 1 (IGMP-v1) and IGMP version 2
(IGMP-v2). Select Disabled to disable it.
Set Static IPv6 address.
Set Static IPv6 Gateway.
Set Static IPv6 DNS1.
Set Static IPv6 DNS2.
You may enable or disable MLD Proxy. MLD proxy is
enabled only for route mode. It works in an IPv6
environment.
You may Enable or Disable the Dual Stack Lite. The
ADSL Router support IPv4/v6 Dual Stack Internet
Protocol.
53
Description
to
enable
Network
Address
Advertisement
Table of Contents
