Table of Contents
Advertisement
4.2.1.
PPoE/PPPoA
Parameter
User Name
Password
VPI
VCI
Connection type
Description
Enter the username exactly as your ISP assigned.
Enter the password that your ISP has assigned to you.
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its valid
value is in the range of 0 to 255. Enter the correct VPI
provided by your ISP. By default, VPI is set to 8.
Virtual channel identifier (VCI) is the virtual channel
between two points in an ATM network. Its valid
value is in the range of 32 to 65535 (0 to 31 is
reserved for local management of ATM traffic). Enter
the correct VCI provided by your ISP. By default, VCI is
set to 35.
Please check with your ISP the method of
32
Advertisement
Table of Contents
