Table of Contents
Advertisement
Field
Use WPS
WPS Settings
WPS state
WPS mode
Start WPS
WPS progress
Reset to OOB
SSID
Authentication
Type
Wireless MAC Address Filter
Active
Action
Mac Address #1–8
router through broadcasting SSID.
Select No to hide SSID. SSID is not visible to
wireless client searches.
WPS technology allows new customers without a
previously-established account to securely connect
to your network at the Wi-Fi hotspot, create and
pay for an account, and access the Internet.
WPS state is displayed here.
Select PIN code or PBC.
Click to start WPS..
Indicates current WPS progress status.
Click Reset to OOB (out of box) to reset all Wi-Fi
settings to default.
Enter an SSID. The service set identification (SSID) is
a unique name to identify the router in the wireless
LAN.
Select from Disabled, WEP-64Bits, WEP-128Bits,
WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK.
Activate or deactivate wireless MAC address filter.
Set Allow or Deny for listed MAC addresses. This
function can be used to allow or deny access to
certain wireless clients based on their MAC
Address.
You can set up to eight MAC addresses.
Description
63
Advertisement
Table of Contents
