Table of Contents
Advertisement
The following table describes the parameters and buttons of this page:
Field
ACL Rule Index
Active
Secure IP
Address
Application
Interface
Access control
Listing
5.6.2.
Filter
Choose Access Management > Filter, and the page shown in the following
figure appears. Select IP/MAC Filter type. The user can set IP/MAC Filter,
Application Filter and URL Filter.
5.6.2.1. IP/MAC Filter
Choose Access Management > Filter, select IP/MAC Filter from the drop-
down list Filter Type Selection, and the page shown in the following figure
appears. The user can set different IP filter rules of a given protocol (TCP, UDP
or ICMP) and a specific direction (incoming, outgoing, or both) to filter the
packets.
You can establish sixteen ACL rules at most.
Click to enable or disable the rule.
The rule is valid if the IP is in this range.
Support Web, FTP, Telnet, SNMP, Ping or ALL.
Support WAN, LAN or Both.
Only the devices whose MAC addresses are listed in the
Access Control Listing can access the router.
Description
78
Advertisement
Table of Contents
