Table of Contents
Advertisement
Item
Model Name
Device Name
Firmware
Version
MAC Address
IPv4 Address
Subnet Mask
Gateway
Loop Status
PoE Status
IV-2. Management
Use the Management Access pages to upgrade firmware, restore or backup
the configuration and configure settings of management access.
Model name of the switch.
System name of the switch. This name will also use
as CLI prefix of each line. ("Switch>" or "Switch#").
Current running firmware image version.
Base MAC address of the switch.
Current system IPv4 address.
A 32-bit number that masks an IP address
TCP / IP protocol under the gateway
Displays whether or not loops exist in the network
Display PoE status
Description
9
Advertisement
Table of Contents
