Removing And Replacing The Front Grill; Removing The Front Grill; Replacing The Front Grill - HP Integrity cx2600 Maintenance Manual
Hp integrity cx2600 operations and maintenance guide
Hide thumbs
Also See for Integrity cx2600:
- Installation instructions manual (10 pages) ,
- Manual (46 pages) ,
- Firmware update manual (15 pages)
Table of Contents
Advertisement
Removing and Replacing the Front Grill
Figure 7-7
shows the server with the front grill removed.
CAUTION:
to electromagnetic interference (EMI) problems, which can result in system failure. Keep the
front grill in place during normal operation.
Observe all ESD safety precautions while performing this procedure. Failure to follow ESD safety
precautions can result in damage to the server.
Figure 7-7 Removing the Front Grill
chasfrntoff
Removing the Front Grill
To remove the front grill, follow these steps:
1.
Use the ACX-15 Torx screwdriver to loosen the five captive screws that secure the grill to
the chassis.
2.
Pull the grill from the front of the server chassis.
Replacing the Front Grill
To install the front grill, follow these steps:
1.
Hold the grill against the front of the server chassis in mounting position.
2.
Tighten the five captive screws to secure the grill to the server chassis.
122
Removing and Replacing Components
Operation of the server without the front grill in place makes the server susceptible
Captive Screws
Advertisement
Table of Contents
Troubleshooting
