5.
Remove the top cover from the chassis. See
(page
28).
CAUTION:
Observe all ESD safety precautions while performing DIMM installation. Failure
to follow ESD safety precautions can result in damage to the server.
6.
Remove the memory airflow guide.
7.
Locate the DIMM sockets where you will install the DIMMs
Figure 3-29 DIMM Slots
8.
Holding the DIMM by its edges, orient the DIMM so the component side is facing the
processors, and insert the DIMM into the appropriate socket.
NOTE:
DIMM connectors are keyed so they can only be installed in the correct orientation.
9.
Firmly and evenly push on each side of the DIMM until it seats in the socket. The socket
retainer clips return to the upright position when the DIMM is fully inserted.
"Installing the Front Grill and Top Cover"
(Figure
3-29).
Installing Memory
51