10/100 System Management Lan Leds; Locator Leds And Button; Mp Reset And Toc Buttons - HP Integrity cx2600 Maintenance Manual

Figure 1-4 HP Integrity cx2620 Server Rear Panel
LVD/SE SCSI Port
1
Management Processor
2
LAN (10/100 LAN) Port
and LEDs
Gigabit Ethernet LAN A
3
(10/100/1000 LAN) Port
and LEDs
MP VGA Port
4
MP Reset Button
5
Locator Button and LED
6

10/100 System Management LAN LEDs

The two system management LAN LEDs display the status of the management LAN. The LEDs
are described in
Table 1-4 Management Processor LEDs
LED
1. Speed
2. Activity

Locator LEDs and Button

Locator LEDs and buttons are provided on the front and rear panels of the server. The buttons
enable or disable the locator function. You can activate the locator LED from a remote location
through the LAN. The locator LED is lit to help call attention to locate the server when it is one
among many.

MP Reset and TOC Buttons

The MP Reset button resets the MP. The Transfer of Control (TOC) button halts all system
processing and I/O activity and restarts the computer system preserving system memory contents
and leaving the MP in communication with the console.
12 Controls, Ports, and Indicators
RS-232 MP Serial Console
7
Port (console, remote,
UPS)
USB Port
8
Serial Port A (Console)
9
Serial Port B
10
System Management
11
LAN B (10/100/1000
LAN) Port and LEDs
TOC Button
12
Table 1-4.
Color
Yellow
Green
State
Off Port is linked at 10 Mbps.
On Port is linked at 100 Mbps.
Off No link has been detected.
On Port is linked.
Keyboard USB Port
13
Mouse USB Port
14
DC Power Supply Wire
15
DC Power Supply Wire
16
DC Power Supply Wire
17
DC Power Supply Wire
18
Status