Ipv6 Bgp Route Reflector Configuration Example - HP 6125XLG Configuration Manual

The output shows that Switch A has learned routing information of AS 65009.
# Display IPv6 BGP routing table information on Switch C.
[SwitchC] display bgp routing-table ipv6
Total number of routes: 4
BGP local router ID is 3.3.3.3
Status codes: * - valid, > - best, d - dampened, h - history,
> Network : 9::
NextHop : ::
PrefVal : 32768
MED
Path/Ogn: i
* i Network : 9::
NextHop : 9::1
PrefVal : 0
MED
Path/Ogn: i
>i Network : 10::
NextHop : 9::1
PrefVal : 0
MED
Path/Ogn: i
>i Network : 50::
NextHop : 10::2
PrefVal : 0
MED
Path/Ogn: 65008i
The output shows that Switch C has learned the route 50::/64.
# Ping hosts on network 50::/64 on Switch C. The ping operations succeed.

IPv6 BGP route reflector configuration example

Network requirements
In Figure 68, run EBGP between Switch A and Switch B, run IBGP between Switch C and Switch B, and
between Switch C and Switch D. Switch C is a route reflector with clients Switch B and D.
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
: 0
: 0
: 0
: 0
260
PrefixLen : 64
LocPrf :
OutLabel : NULL
PrefixLen : 64
LocPrf : 100
OutLabel : NULL
PrefixLen : 64
LocPrf : 100
OutLabel : NULL
PrefixLen : 64
LocPrf : 100
OutLabel : NULL