HP 6125XLG Configuration Manual page 207

Step
3. Enter BGP IPv4 unicast
instance view or BGP-VPN
IPv4 unicast instance view.
4. Configure the default MED
value.
To configure the default MED value (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Enter BGP IPv6 unicast
instance view or BGP-VPN
IPv6 unicast instance view.
4. Configure the default MED
value.
Enabling MED comparison for routes from different ASs
This task enables BGP to compare the MEDs of routes from different ASs.
To enable MED comparison for routes from different ASs (IPv4):
Step
1. Enter system view.
Enter BGP view or BGP-VPN
2.
instance view.
3. Enter BGP IPv4 unicast
instance view or BGP-VPN
IPv4 unicast instance view.
4. Enable MED comparison for
routes from different ASs.
To enable MED comparison for routes from different ASs (IPv6):
Step
1. Enter system view.
2. Enter BGP view.
Command
ipv4-family [ unicast ]
default med med-value
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
ipv6-family [ unicast ]
default med med-value
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
ipv4-family [ unicast ]
compare-different-as-med
Command
system-view
bgp as-number
196
Remarks
N/A
The default MED value is 0.
Remarks
N/A
N/A
N/A
The default MED value is 0.
Remarks
N/A
N/A
N/A
By default, this feature is disabled.
Remarks
N/A
N/A