Advertising A Default Route; Configuring Received/Redistributed Route Filtering; Configuring A Preference For Ripng - HP 6125XLG Configuration Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Step
1.
Enter system view.
2.
Enter interface view.
3.
Advertise a summary IPv6
prefix.

Advertising a default route

Step
1.
Enter system view.
2.
Enter interface view.
3.
Configure RIPng to advertise a
default route.

Configuring received/redistributed route filtering

Perform this task to filter received or redistributed routes by using an IPv6 prefix list. You can also
configure RIPng to filter routes redistributed from other routing protocols and routes from a specified
neighbor.
To configure a RIPng route filtering policy:
Step
1.
Enter system view.
2.
Enter RIPng view.
3.
Configure a filter policy
to filter received routes.
4.
Configure a filter policy
to filter redistributed
routes.

Configuring a preference for RIPng

Routing protocols each have a preference. When they find routes to the same destination, the route found
by the routing protocol with the highest preference is selected as the optimal route. You can manually set
a preference for RIPng. The smaller the value, the higher the preference.
Command
system-view
interface interface-type interface-number
ripng summary-address ipv6-address
prefix-length
Command
system-view
interface interface-type
interface-number
ripng default-route { only |
originate } [ cost cost ]
Command
system-view
ripng [ process-id ] [ vpn-instance
vpn-instance-name ]
filter-policy { acl6-number | prefix-list
prefix-list-name } import
filter-policy { acl6-number | prefix-list
prefix-list-name } export [ protocol
[ process-id ] ]
289
Remarks
N/A
N/A
By default, the
summary IPv6 prefix
is not configured.
Remarks
N/A
N/A
By default, RIPng does not advertise a
default route.
This command advertises a default
route on the current interface
regardless of whether the default route
is available in the local IPv6 routing
table.
Remarks
N/A
N/A
By default, RIPng does not filter
received routing information.
By default, RIPng does not filter
redistributed routing information.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents