HP 6125XLG Configuration Manual page 273

[SwitchC-bgp] peer 102::2 as-number 200
[SwitchC-bgp] ipv6-family
[SwitchC-bgp-ipv6] peer 101::2 enable
[SwitchC-bgp-ipv6] peer 102::2 enable
[SwitchC-bgp-ipv6] network 101:: 96
[SwitchC-bgp-ipv6] network 102:: 96
# Configure Switch D.
<SwitchD> system-view
[SwitchD] bgp 200
[SwitchD-bgp] router-id 4.4.4.4
[SwitchD-bgp] peer 102::1 as-number 200
[SwitchD-bgp] ipv6-family
[SwitchD-bgp-ipv6] peer 102::1 enable
[SwitchD-bgp-ipv6] network 102:: 96
3. Configure Switch C as a route reflector, and configure Switch B and Switch D as its clients.
[SwitchC-bgp-ipv6] peer 101::2 reflect-client
[SwitchC-bgp-ipv6] peer 102::2 reflect-client
[SwitchC-bgp-ipv6] quit
[SwitchC-bgp] quit
Verifying the configuration
# Execute the display bgp routing-table ipv6 command on Switch D.
[SwitchD] display bgp routing-table ipv6
Total number of routes: 5
BGP local router ID is 4.4.4.4
Status codes: * - valid, > - best, d - dampened, h - history,
>i Network : 1::
NextHop : 101::2
PrefVal : 0
MED
Path/Ogn: 100i
>i Network : 100::
NextHop : 101::2
PrefVal : 0
MED
Path/Ogn: i
>i Network : 101::
NextHop : 102::1
PrefVal : 0
MED
Path/Ogn: i
s - suppressed, S - stale, i - internal, e - external
Origin: i - IGP, e - EGP, ? - incomplete
: 0
: 0
: 0
262
PrefixLen : 64
LocPrf : 100
OutLabel : NULL
PrefixLen : 96
LocPrf : 100
OutLabel : NULL
PrefixLen : 96
LocPrf : 100
OutLabel : NULL