Displaying And Maintaining Ospf - HP 6125XLG Configuration Manual

Step
2. Configure the source address
of echo packets.
3. Enter OSPF view.
4. Enable OSPF FRR to specify a
backup next hop by using a
routing policy.

Displaying and maintaining OSPF

Execute display commands in any view and reset commands in user view.
Task
Display OSPF brief information.
Display OSPF statistics.
Display GR status of the specified
OSPF process.
Display Link State Database
information.
Display OSPF neighbor
information.
Display neighbor statistics for
OSPF areas.
Display routing table information.
Display virtual link information.
Display OSPF request queue
information.
Display OSPF retransmission
queue information.
Display OSPF ABR and ASBR
information.
Display OSPF interface
information.
Display OSPF error information.
Display OSPF ASBR route
summarization information.
Display the global route ID.
Clear OSPF statistics.
Reset an OSPF process.
Command
bfd echo-source-ip ip-address
ospf [ process-id | router-id
router-id | vpn-instance
vpn-instance-name ] *
fast-reroute route-policy
route-policy-name
Command
display ospf [ process-id ] brief
display ospf [ process-id ] cumulative
display ospf [ process-id ] graceful-restart [ verbose ]
display ospf [ process-id ] lsdb [ brief | [ { ase | router | network |
summary | asbr | nssa | opaque-link | opaque-area | opaque-as }
[ link-state-id ] ] [ originate-router advertising-router-id | self-originate ] ]
display ospf [ process-id ] peer [ verbose ] [ interface-type
interface-number ] [ neighbor-id ]
display ospf [ process-id ] peer statistics
display ospf [ process-id ] routing [ interface interface-type
interface-number ] [ nexthop nexthop-address ] [ verbose ]
display ospf [ process-id ] vlink
display ospf [ process-id ] request-queue [ interface-type
interface-number ] [ neighbor-id ]
display ospf [ process-id ] retrans-queue [ interface-type
interface-number ] [ neighbor-id ]
display ospf [ process-id ] abr-asbr
display ospf [ process-id ] interface [ all | interface-type
interface-number ]
display ospf [ process-id ] error
display ospf [ process-id ] asbr-summary [ ip-address { mask |
mask-length } ]
display router id
reset ospf [ process-id ] counters
reset ospf [ process-id ] process [ graceful-restart ]
80
Remarks
By default, the source address of
echo packets is not configured.
N/A
By default, OSPF FRR is not
configured.