HP 6125XLG Configuration Manual page 189

To configure an EBGP peer group by using Method 2 (IPv6):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Create an EBGP peer group.
4. Create an IPv6 BGP peer and
specify its AS number.
5. Add the peer into the EBGP
peer group.
6. (Optional.) Configure a
description for the peer group.
7. Create and enter BGP IPv6
unicast instance view or
BGP-VPN IPv6 unicast
instance view.
8. Enable the router to exchange
IPv6 unicast routing
information with peers in the
specified peer group.
To configure an EBGP peer group by using Method 3 (IPv4):
Step
1. Enter system view.
2. Enter BGP view or BGP-VPN
instance view.
3. Create an EBGP peer group.
4. Add a peer into the EBGP
peer group.
5. (Optional.) Configure a
description for the peer group.
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
group group-name external
peer ipv6-address as-number
as-number
peer ipv6-address group
group-name [ as-number
as-number ]
peer group-name description
description-text
ipv6-family [ unicast ]
peer group-name enable
Command
system-view
•
Enter BGP view:
bgp as-number
•
Enter BGP-VPN instance view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
group group-name external
peer ip-address group group-name
as-number as-number
peer group-name description
description-text
178
Remarks
N/A
N/A
By default, no EBGP peer group is
created.
By default, no IPv6 BGP peer is
created.
By default, no peer exists in the
peer group.
The as-number as-number option,
if used, must specify the same AS
number as the peer ip-address
as-number as-number command.
By default, no description is
configured for the peer group.
By default, the BGP IPv6 unicast
instance view and BGP-VPN IPv6
unicast instance view are not
created.
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.
Remarks
N/A
N/A
By default, no EBGP peer group is
created.
By default, no peer exists in the
peer group.
By default, no description is
configured for the peer group.