Display Ospfv3 Routing - HP 6125XLG Command Reference Manual

-------------------------------------------------------------------------
Type LinkState ID
0x2009 0.0.0.0
Table 87 Command output
Field
Area
Interface
Nbr-ID
Retransmit List
Type
AdvRouter
SeqNum
Age
CkSum

display ospfv3 routing

Use display ospfv3 routing to display OSPFv3 route information.
Syntax
display ospfv3 [ process-id ] routing [ ipv6-address prefix-length ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
process-id: Specifies an OSPFv3 process by its ID in the range of 1 to 65535.
ipv6-address prefix-length: Specifies an IPv6 address. The ipv6-address argument specifies an IPv6 prefix.
The prefix-length argument specifies a prefix length in the range of 0 to 128.
Usage guidelines
If no process is specified, this command displays the OSPFv3 route information for all processes.
Examples
# Display OSPFv3 routing information.
<Sysname> display ospfv3 routing
Area: 0.0.0.0
Interface Vlan-interface11
Nbr-ID 1.2.2.2 Retransmit List
AdvRouter
1.3.3.3
OSPFv3 Process 1 with Router ID 1.1.1.1
SeqNum Age
0x80000001 3600
Description
Area ID.
Interface type and sequence number.
Neighbor ID.
Retransmission list information.
LSA type.
Advertising router.
LSA sequence number.
LSA age.
Checksum.
366
CkSum
0x49fb