Rip Input; Rip Metricin - HP 6125XLG Command Reference Manual

cost: Specifies a cost for the default route, in the range of 1 to 15. The default is 1.
no-originate: Advertises only non-default routes.
Usage guidelines
An interface that is enabled to advertise a default route does not receive any default route from RIP
neighbors.
Examples
# Configure VLAN-interface 10 to advertise only a default route with a metric of 2.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip default-route only cost 2
# Configure VLAN-interface 10 to advertise a default route with a metric of 2 and other routes.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip default-route originate cost 2
Related commands
default-route

rip input

Use rip input to enable an interface to receive RIP messages.
Use undo rip input to disable an interface from receiving RIP messages.
Syntax
rip input
undo rip input
Default
An interface is enabled to receive RIP messages.
Views
Interface view
Predefined user roles
network-admin
Examples
# Disable VLAN-interface 10 from receiving RIP messages.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] undo rip input

rip metricin

Use rip metricin to configure an interface to add a metric to inbound routes.
Use undo rip metricin to restore the default.
50