HP 6125XLG Command Reference Manual page 226

Syntax
display bgp group ipv6 [ unicast ] [ vpn-instance vpn-instance-name ] [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters. If no VPN is specified, the command displays BGP IPv6 unicast peer group information for
the public network.
group-name: Specifies a BGP IPv6 unicast peer group by its name, a case-sensitive string of 1 to 47
characters. If no group is specified, this command displays brief information about all BGP IPv6 unicast
peer groups.
Usage guidelines
The command with the unicast keyword has the same effect as that without the unicast keyword.
Examples
# Display brief information about all BGP IPv6 unicast peer groups for the public network.
<Sysname> display bgp group ipv6
BGP peer group: abc
Remote AS number: not specified
Type: external
Members:
1::1
BGP peer group: group1
Remote AS: 600
Type: external
Members:
3::3
# Display detailed information about BGP IPv6 unicast peer group group1 for the public network.
<Sysname> display bgp group ipv6 group1
BGP peer group: group1
Remote AS: 600
Type: external
Maximum number of prefixes allowed: 4294967295
Threshold: 75%
Configured hold time: 180 seconds
Keepalive time: 60 seconds
Minimum time between advertisements: 30 seconds
Peer preferred value: 0
Routing policy configured:
No routing policy is configured
215