Maximum Load-Balancing (Ospf View); Network (Ospf Area View) - HP 6125XLG Command Reference Manual

Predefined user roles
network-admin
Parameters
number: Specifies the upper limit of external LSAs in the LSDB, in the range of 1 to 1000000.
Examples
# Specify the upper limit of external LSAs as 400000.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] lsdb-overflow-limit 400000

maximum load-balancing (OSPF view)

Use maximum load-balancing to specify the maximum number of equal-cost multi-path (ECMP) routes for
load balancing.
Use undo maximum load-balancing to restore the default.
Syntax
maximum load-balancing maximum
undo maximum load-balancing
Views
OSPF view
Predefined user roles
network-admin
Parameters
maximum: Specifies the maximum number of ECMP routes.
Usage guidelines
The value range for the maximum argument and the default setting depend on the max-ecmp-num
command.
If you set the maximum number of ECMP routes to m by using the max-ecmp-num command, the
maximum argument in the maximum load-balancing command is in the range of 1 to m and defaults to
m.
Examples
# Specify the maximum number of ECMP routes as 2.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] maximum load-balancing 2
Related commands
max-ecmp-num

network (OSPF area view)

Use network to enable OSPF on the interface attached to the specified network in the area.
107