Ipv6 Enable; Ipv6 Filter-Policy Export - HP 6125XLG Command Reference Manual

Examples
# Configure the router to generate a default route in a Level-2 LSP.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 default-route-advertise
Related commands
apply isis

ipv6 enable

Use ipv6 enable to enable IPv6 for an IS-IS process.
Use undo ipv6 enable to disable IPv6.
Syntax
ipv6 enable
undo ipv6 enable
Default
IPv6 is disabled for an IS-IS process.
Views
IS-IS view
Predefined user roles
network-admin
Examples
# Create IS-IS process 1, and enable IPv6 for the process.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable

ipv6 filter-policy export

Use ipv6 filter-policy export to configure IPv6 IS-IS to filter redistributed routes.
Use undo ipv6 filter-policy export to remove the configuration.
Syntax
ipv6 filter-policy { acl6-number | prefix-list prefix-list-name | route-policy route-policy-name } export
[ protocol [ process-id ] ]
undo ipv6 filter-policy export [ protocol [ process-id ] ]
Default
IPv6 IS-IS does not filter redistributed routes.
Views
IS-IS view
399