Import-Route (Ospfv3 View) - HP 6125XLG Command Reference Manual

Parameters
interval-value: Specifies GR restart interval in the range of 40 to 1800 seconds.
Usage guidelines
The value of the GR restart interval cannot be smaller than the maximum OSPFv3 neighbor dead time of
all the OSPFv3 interfaces. Otherwise, GR restart might fail.
Examples
# Configure the GR restart interval for OSPFv3 process 1 as 100 seconds.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] graceful-restart interval 100
Related commands
ospfv3 timer dead

import-route (OSPFv3 view)

Use import-route to redistribute routes.
Use undo import-route to disable route redistribution.
Syntax
import-route protocol [ process-id | all-processes | allow-ibgp ] [ cost cost | route-policy
route-policy-name | type type ] *
undo import-route protocol [ process-id | all-processes ]
Default
OSPFv3 route redistribution is disabled.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
protocol: Redistributes routes from the specified routing protocol, which can be bgp4+, direct, isisv6,
ospfv3, ripng, or static.
process-id: Specifies the process ID of a routing protocol, in the range of 1 to 65536. It defaults to 1. This
argument takes effect only when the protocol is isisv6, ospfv3, or ripng.
all-processes: Redistributes routes from all the processes of the specified routing protocol. This keyword
takes effect only when the protocol is ripng, ospfv3, or isisv6.
allow-ibgp: Allows redistribution of IBGP routes. It is available only when the protocol is bgp4+.
cost value: Specifies a cost for redistributed routes, in the range of 1 to 16777214. The default is 1.
route-policy route-policy-name: Uses the specified routing policy to filter redistributed routes. The
route-policy-name argument is a case-sensitive string of 1 to 63 characters.
type type: Specifies the type for redistributed routes, 1 or 2. It defaults to 2.
376