Silent-Interface; Summary - HP 6125XLG Command Reference Manual

Examples
# Configure RIPv2 in broadcast mode on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip version 2 broadcast
Related commands
version

silent-interface

Use silent-interface to disable an interface from sending RIP messages. The interface can still receive RIP
messages.
Use undo silent-interface to restore the default.
Syntax
silent-interface { interface-type interface-number | all }
undo silent-interface { interface-type interface-number | all }
Default
All RIP interfaces can send RIP messages.
Views
RIP view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Disables an specified interface from sending RIP messages.
all: Disables all interfaces from sending RIP messages.
Examples
# Configure all VLAN interfaces to operate in silent mode except VLAN-interface 10.
<Sysname> system-view
[Sysname] rip 100
[Sysname-rip-100] silent-interface all
[Sysname-rip-100] undo silent-interface vlan-interface 10
[Sysname-rip-100] network 131.108.0.0

summary

Use summary to enable automatic RIPv2 route summarization. Natural masks are used to advertise
summary routes to reduce the size of routing tables.
Use undo summary to disable automatic RIPv2 route summarization to advertise all subnet routes.
Syntax
summary
56