Samsung SRD-480D User Manual page 75

• Custom DST contains two options : "Day of Week" and "Day
of Month".
In "Day of Week", specify the month, week, day of the week
and time for the start and end times of DST.
• "Day of Month" requires you to specify the month, day and
hour for the start and end times of DST.
NTP Setting
NTP (Network Time Protocol) is used to synchronize the time between network devices based on the base
device.
- MODE : Select one from Server/Client/Both. In Server mode, the DVR itself is the basis of providing the time;
In Client mode, the time will be propagated from the time server. In Both mode, the DVR plays both of server
and client.
- Interval : Specify the interval of receiving the time information if the NTP mode is set to Client. (1/3/6/12/24 hr.)
- IP Type : Select Public IP if the DVR obtains the time information from a public NTP server on the Internet;
Select Local IP if the DVR obtains the time information from your specified NTP server.
- Local IP : If the IP type is set to Local IP, provide the IP of the NTP server.
Disk
The DVR shows the storage information of the internal HDD
such as total and remaining capacity of the HDD.
English _75