Samsung SRD-480D User Manual page 37

To configure the audio settings
• Audio Channel : Select a channel for audio setting.
• Auto Recording : Specify the saving of the existing audio settings. If you set it to <Off>, only the live video will
output the audio signal; if setting it to <On>, the recording video as well will output the audio signal.
• Audio Gain : Use the +/– buttons to adjust the volume.
• Sync Video Channel : Select a channel to sync with the input audio signal. If you set to synchronize the video
of channel 1 with channel 4, the audio input to channel 1 will be output if you select channel 4. By default,
channel 1 audio will output in channel 1 video.
• Audio Mix : Select an audio signal to use in live video. If you set <Mix On>, all incoming audio signals will be
mixed before being output. So if you select a specific audio, it will be output regardless of the channel that
you selected.
Program Setting
You can adjust the frame rate and the video quality for a recording program that will be used for Manual & Event
and Schedule & Event. Select a program according to the frame rate, quality of your choice, or make settings
manually. For event recording, you can specify up to the maximum frame rates for each channel; if events occur
from more than one channel, the recoding frame rate can be adjusted accordingly.
MENU - ► - ► - ENTER - ► - ENTER
• Program : You can select a total of 9 programs from A to I, and specify the normal/event resolution for each
program.
• Ch : Display the channel number.
English _37