Samsung SRD-480D User Manual page 47

• Remote Control ID : Provide the ID of the remote control in sync with the DVR. You can specify up to 16
remote control IDs. Each remote control can control up to 16 DVRs.

For registering the remote control ID, refer to "Changing the Remote Control ID". (page 13)
• Serial : Configure the settings of the devices connected to each serial port, and the transfer-related menus.
• PTZ : Select this if you use the serial port to control the PTZ operations.
To set the serial port
You can use a total of 3 serial ports for your settings. One for RS-232C (COM1), and two for RS-232C (COM2, 3).
• Text : Since only COM1 port (RS-232) supports text, select COM1 in the serial port menu.
- Interface : Fixed to RS-232.
- Baud Rate/Parity Bit/Stop Bit/Data Bit : Configure the same settings with those of each device.

J
For the input text, no keyword search is available.
• Keyboard : If you want to use the keyboard, set the device to Keyboard and select a keyboard to use.
- Interface : Select COM2 or COM3.
- Baud Rate/Parity Bit/Stop Bit/Data Bit : Configure the same settings with those of the keyboard.
• PTZ : If you use the serial port to control the PTZ operations, select PTZ.
English _47