Samsung SRD-480D User Manual page 41

Normal event setting
You can specify the motion detection area, sensor and text.
MENU - ► - ► - ► - ENTER - ► - ENTER
Motion Detection Setting
The Motion Detection item will be used to detect every single channel and notice the user of a motion if it
occurs.
• MD : Select a channel that you want to perform the motion detection for.
• Sensitivity : Select a sensitivity level for each channel from Off, lowest, 1~10, and highest.
• Area : Specify the area for which you want to perform the motion detection.
If you set it to All, you have two options: Set All or Clear All. If you set it for each channel, you will have three
options: Set All, Clear All and Select Area.
• Sensor : You can use 4 sensors. If set it to <All>, all channels will be set to N.O and N.C in the same manner;
Alternately, you can select a channel and set it to: N.O., N.C., or Off.
• Text : Provide the message. You must specify the text setting in "Event Setup" of the OSD menu.
- Sync Text With : Select a channel to synchronize with the text.
- Seek Header : If the information (Manual, VSI Pro, VSI Pro Hydra) from external devices contains other than
the protocol, this option will check how and what each item of the information consists of.
The header is a start item of each distinctive piece of information that will be inserted for your reference.
Set <Seek Header> to <On> and provide text to be recognized as header.

You can specify two headers for each because a single device can transfer data to multiple external devices.
- Delimiter : The delimiter may differ depending on the host device. So refer to the user manual or contact
your retailer for the exact delimiter.
- Timeout(ms) : Even if you provide less information than specified in <Lines>, the last line you provided will
be set as the final line after a specific time.
- Lines : Define how many lines a piece of information consists of.

J
Some external devices may not be recognized depending on the model. You must contact the retailer for compatibility before
installation.
English _41