Samsung SRD-480D User Manual page 74

SmartViewer
If it's the same device, the configuration file will be saved
immediately.
Provide the admin password and click <OK>. The configuration
file will be imported.
When done, you will see the "Completed" message and the
<Finish> button will be active.
• Restart : Use to restart the DVR.
• Default : Return to the current settings to the factory default.
• Change IP : Use to change the IP of the DVR.
M 
Even if you reset the DVR, the system time and date and network
settings will not be affected.
Date/Time
Date & Time
• Timezone & Daylight Saving Time : This menu is in sync with
your time zone settings. Namely, If you select an area where
DST is applied in the Time Zone menu, DST will be
automatically set to On. Otherwise, it will be set to Off. Select
<Custom DST> if you want to configure your own DST
settings regardless of the standard time zone and DST. If you
select <Custom DST>, the Custom DST menu item will be
displayed.
• System Time : Display the system time and date of the DVR.
The system time can be changed only in the applicable menu
of an individual DVR.
74_ SmartViewer