Table of Contents
Advertisement
menu setup
To delete an existing schedule
Select an index and press <Delete>.
If you press <Delete> without selecting an index, the previous index will be deleted at first. Then, deletion will
progress in the descending order from the largest number of index.
To change an existing schedule
Select an index and change the date, program and time manually.
If all indexes up to 50 are already specified, click a timeline from the table and select a time to change.
Then, the existing content will be deleted and changed to your new settings.
J
If you make a duplicate setting in the same time, the duplicate items will be marked '!' in the table.
If you configure the time line settings, the existing ones cannot be included.
To make event recoding
You can set to make recoding of an event if it occurs.
To make event recording, specify the resolution, frame rate and quality to include in the program.
1. Set <Record Mode> to <Manual & Event>, and press [ENTER].
2. Use the arrow button [▼] to move to <Program>, and press [ENTER].
3. Select a program to apply for the event recording.
The resolution for each program can be specified in "Record Setup > Program". (Page 37)
M
If you want to make the event recording only, set the normal frame rate to 0fps in program setup, and specify the frame rate
only for the event.
36_ menu setup
- Quick Links:
- Part Names and Functions (Rear)
Hide quick links:
Advertisement
Table of Contents
