Samsung SRD-480D User Manual page 40

menu setup
• Including Picture : If you set it to <On>, the email to send if an event occurs will include the event image at
the event occurrence time.
If you set it <Off>, the email will be sent if an event occurs but with no image attached.
• SMTP Server : Provide the SMTP server address for the sender email address.

If the server adopts the authentication system, the <User ID> and <Password> items will be created.
- SMTP Port : Select a port to use in SMTP server.
- Authentication : Authentication will be performed using the protocol of TLS (Transport Layer Security), or
email address and account for SMTP authentication. Use an email account in compliant with TLS or
SMTP-AUTH.
- Send Test-Mail : This is to check if you specify the sender, receiver of the email and other necessary
settings properly.
To synchronize the event via FTP
1. Select <FTP> for event synchronization.
2. Specify whether to upload via FTP. The image will be sent every moment the event is active.
3. Select <FTP Setup> and provide each item.
• Server URL : Provide the FTP server address.
• User ID : Provide the ID for connecting to the FTP server.
• Password : Provide the password for connecting to the FTP server.
• FTP Directory : Specify the saving path for the images that will be transferred to the FTP server.
If you leave it blank, the images will be transferred to the server-specified folder; if you provide a wrong path,
the images will be sent to the specified folder by the FTP server.

Ex) If you provide "Download", you must have created the "Download" folder in a sub directory of the server. If an event occurs,
the images will be transferred to the "Download" folder.
40_ menu setup