Samsung SRD-480D User Manual page 39

Event Action Setting
Specify the operation according to the incoming event.
MENU - ► - ► - ► - ENTER - ENTER - ▼ - ▼ - ▼ - ▼ - ▼ - ENTER
• Action Duration : This is used for relay and buzzer settings. This will keep the operation as long as the
specified time.

The e-mail will be transferred at a specified interval; FTP will transfer the image each time an event is activated.
• Normal Event Source : You can set the normal event source to one of 4 sensors, 4 MDs, 4 video losses and
text.
• System Event Source : As system event source, you can set some or whole of: HDD Fail, HDD Almost Full,
Fan Fail, Password Fail, DDNS Reg. Fail, and Abnormal Recording Stop.
To synchronize the event via email
There are three ways to transfer via email: non-authentication, SMTP authentication, and TLS authentication.
1. Select <E-mail> for event synchronization.
2. Specify the duration.
The email will be transferred at a specified interval.
3. Select <Normal Event Source> or <System Event Source>.
4. Select <E-Mail Setup> and provide each item.
• E-Mail Address : Provide the email address at which you want to receive messages.
• Sender Address : Provide a valid (currently used or existing) email address.
English _39