Create Log Report - 3M WX36 Application Manual

7 Create Log Report

In order to create Log Report, choose a projector or group that you want to create Report from the tree view.
Ands then, select [File]  [Log Report]. The following dialogue appears.
The format of Log Report is shown below.
Projector Name: Projector 1
Model: X62w
Connection: 192.168.1.10:23 (00-00-87-f3-eb-01)
Period: 2008/04/01 - 2008/04/30
Use Information
[Date],[Power On Count],[Power Off Count],[Lamp Time],[Filter Time],[Error Count]
2008/04/01,5,5,145,145,0
2008/04/02,3,3,148,148,1
:
:
2008/04/30,1,1,193,193,0
Error Information
[Date], [Time], [Error Info]
2008/04/02,17:43:36,Disconnect
Item
Projector Name
Model
Connection
Period
Use Information
Date
Power On Count
Power Off Count
Lamp Time
Filter Time
Error Count
Error Information
Date
Time
Error Info
© 3M 2012. All Rights Reserved.
Description
Projector name
Model name
Connection type
Log data period
Usage information
Date
Sum of power status change from OFF to ON
Sum of power status change from ON to OFF
Lamp hours
Filter hours
Sum of Error / Warnings
Error Information
Date of Error
Time of Error
Error type
Period --- The reporting period.
Start : Start Date
End : End Date
Output folder --- Output folder
The Log Report will create in the output folder when OK
button is pressed. The folder contains individual Log
Report of each projector separately. The individual log
life is provided as csv format with projector name
("projector name.csv").
Note
Serial (RS232C):
COM Port number
Network:
IP Address:Portnumber (MAC address)
yyyy/mm/dd
yyyy/mm/dd
The lamp hours when the report is generated.
The filter hours when the report is generated.
yyyy/mm/dd
hh:nn:ss
85