3M WX36 Application Manual page 43

[IMAGE] Tab
Function
Aspect
Over Scan
Position
H Phase
H Size
Auto Adjust
Reset
[INPUT] Tab
Function
Progressive
Video NR
Color Space
Component
S-Video Format
C-Video Format
Frame Lock - Computer in1
Frame Lock - Computer in2
Computer in1
Computer in2
[SETUP] Tab
Function
Auto Keystone
Keystone V
Eco Mode
Mirror
Standby Mode
Monitor Out - Computer in1
Monitor Out - Computer in2
Monitor Out - Component
Monitor Out - S-Video
Monitor Out - Video
Monitor Out - Standby
Reset
© 3M 2012. All Rights Reserved.
General Description
Switches the mode for aspect ratio.
Normal / 4:3 / 16:9 / 16:10 / 14:9
Adjusts the over-scan ratio.
[-]: Decrease the over scan value.
[+]: Increase the over scan value.
Adjusts the display position.
[ ]: Increase the vertical position value.
[ ]: Decrease the vertical position value.
[ ]: Increase the horizontal position value.
[ ]: Decrease the horizontal position value.
Adjusts the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjusts the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
[Execute]: Performs the automatic adjustment feature.
Initialize the selected function.
Over Scan / V Position / H Position / H Size
[Execute]: After the confirmation message, the selected function will be initialized.
General Description
Switches the progress mode.
TV / FILM / Off
Switches the noise reduction mode.
High / Mid / Low
Switches the mode for color space.
Auto / RGB / SMPTE240 / REC709 / REC601
Switches the function of the COMPONENT port.
Component / Scart RGB
Switches the mode for video format of the S-VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Switches the mode for video format of the VIDEO port.
Auto / NTSC / PAL / SECAM / NTSC4.43 / M-PAL / N-PAL
Selects the frame lock function on/off of the COMPUTER IN1 port.
On / Off
Selects the frame lock function on/off of the COMPUTER IN2 port.
On / Off
Selects the computer input signal type of the COMPUTER IN1 port.
Auto / Sync On G Off
Selects the computer input signal type of the COMPUTER IN2 port.
Auto / Sync On G Off
General Description
[Execute]: Performs the automatic keystone distortion correction.
Corrects the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Turns off/on the eco mode.
Normal / Eco
Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Switches the standby mode setting.
Normal / Saving
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.
Computer in1 / Off
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.
Computer in2 / Off
Assigns the MONITOR OUT when the COMPONENT input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT in the standby mode.
Computer in1 / Computer in2 / Off
Initialize the selected function.
Keystone V
[Execute]: After the confirmation message, the selected function will be initialized.
43