3M WX36 Application Manual page 65

CL72X / CL73W / CL73X / NE7 / PL93X / WX36i / X31i / X36i / X46i
[STATUS] Tab
Function
Power
Input Source
Error Status
Blank On/Off
Mute
Freeze
Lamp Time
Filter Time
Reset
[PICTURE] Tab
Function
Brightness
Contrast
Gamma
Color Temp
Color
Tint
Sharpness
Active Iris
My Memory
Reset
© 3M 2012. All Rights Reserved.
General Description
Displays the current power status.
On / Standby / Cool down
Displays the current Input source.
Computer in1 / Computer in2 / LAN / USB type A / USB type B / HDMI / S-Video / Video
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error /
Filter Error / Other Error
Displays the current blank on/off status.
On / Off
Displays the current mute status.
On / Off
Displays the current freeze status.
Normal / Freeze
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
General Description
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
Default-1 / Default-2 / Default-3 / Default-4 / Default-5 / Default-6 / Default-7 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Custom-7
Switches the color temperature mode.
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / Hi-Bright-4 /
Custom-1 / Custom-2 / Custom-3 / Custom-4 / Custom-5 / Custom-6 / Custom-7
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Changes the active iris control mode.
Presentation / Theater / Off
Saves the current adjustment data.
Save-1 / Save-2 / Save-3 / Save-4
Loads the data from the memory.
Load-1 / Load-2 / Load-3 / Load-4
[Execute]: Performs each function.
Initialize the selected function.
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
65