3M WX36 Application Manual page 26

[PICTURE-1] Tab
Function
Gamma
Custom Gamma
Color Temp
Custom User R
Custom User G
Custom User B
Color Bal R
Color Bal G
Color Bal B
Sharpness
Color
Tint
My Memory
Reset
[PICTURE-2] Tab
Function
Position
H Phase
H Size
Over Scan
Reset
© 3M 2012. All Rights Reserved.
General Description
Switches the gamma mode.
Normal / Cinema / Dynamic / Custom
Adjusts the gamma data.
[-]: Decrease the gamma value.
[+]: Increase the gamma value.
Switches the color temperature mode.
Low / Middle / High / User
Adjusts the red color level for the user mode of red color temperature.
100 / 90 / 80 / 70 / 60 / 50
Adjusts the green color level for the user mode of green color temperature.
100 / 90 / 80 / 70 / 60 / 50
Adjusts the blue color level for the user mode of blue color temperature.
100 / 90 / 80 / 70 / 60 / 50
Adjusts the red color balance.
[-]: Decrease the red color balance value.
[+]: Increase the red color balance value.
Adjusts the green color balance.
[-]: Decrease the green color balance value.
[+]: Increase the green color balance value.
Adjusts the blue color balance (blue).
[-]: Decrease the blue color balance value.
[+]: Increase the blue color balance value.
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Loads the data from the memory.
Load1 / Load2 / Load3 / Load4
Saves the current adjustment data into the memory.
Save1 / Save2 / Save3 / Save4
[Execute]: Performs each function.
Initialize the selected function.
Color Bal R / Color Bal G / Color Bal B / Sharpness / Color / Tint
[Execute]: After the confirmation message, the selected function will be initialized.
General Description
Adjust the display position.
[ ]: Increase the vertical position value.
[ ]: Decrease the vertical position value.
[ ]: Increase the horizontal position value.
[ ]: Decrease the horizontal position value.
Adjust the horizontal phase to eliminate flicker.
[-]: Decrease the horizontal phase value.
[+]: Increase the horizontal phase value.
Adjust the horizontal size.
[-]: Decrease the horizontal size value.
[+]: Increase the horizontal size value.
Adjust the over-scan ratio.
[-]: Decrease the over-scan value.
[+]: Increase the over-scan value.
Initialize the selected function.
V Position / H Position / H Size / Over Scan
[Execute]: After the confirmation message, the selected function will be initialized.
26