My Image ( E -Shot) Transfer - 3M WX36 Application Manual

3.24 MY IMAGE (e-SHOT) transfer
You can send a My Image (e-SHOT) file to a
projector that supports My Image (e-SHOT) feature.
This function is available for the following models,
CL33X, CL35X, CL67N, CL69N, CL72X, CL73W,
CL73X, CL86X, NE7, PL90X, PL92X, PL93X,
PL96X, WX36, WX36i, X21i, X26i, X30N, X31, X31i,
X35N, X35NK, X36, X36i, X46, X46i, X56, X90 and
X90K.
The PL95X, X62w, X64w, X90w, X95, X95K, X95i
and X95iK support My Image (e-SHOT) also, but
this tool is not supported those models due to
transfer mechanism difference. Please refer to the Projector Transfer Application which supports this feature for
these models.
Select [Option]  [Image Send] to display the window "Send Image file to projector(s)" as shown next.
In order to add projectors on the list, please mark
the projector group on the tree view. Also you can
unselect projector individually.
Once you select the image file and store location number, the "Send" button becomes available. The compatible
image file is only PJ1 format file that can be created by Projector Image Tool (PJImg).And then, click the Send
button to transfer image. The maximum size of transferred file is depending on the model. Please check the
following list.
PJ1 format file
CL33X / CL35X / CL67N / CL69N / CL72X / CL73W / CL73X / CL86X / NE7 / PL90X / PL92X / PL93X /
WX36 / WX36i / X21i / X26i / X30N / X31 / X31i / X35N / X35NK / X36 / X36i / X46 / X46i / X56 / X90 / X90K
Less than equal 130,816byte
JPEG file
CL33X / CL35X / CL67N / CL69N / CL72X / CL73W / CL73X / CL86X / NE7 / PL92X / PL93X / WX36 /
WX36i / X21i / X26i / X31 / X31i / X36 / X36i / X46 / X46i / X56
Less than equal 262,144byte
The status is shown during transfer. The status will change "Completed" if it succeeds.
[Note]
Please verify the port setting on the projector and the port / authentication setting on the application.
© 3M 2012. All Rights Reserved.
76