Open The Build - In Html Page In The Projector - 3M WX36 Application Manual

3.25.3 Control User-defined Model
(1) Power On
Select [Control]  [Power ON] to turn on the power. You can also turn on the power by clicking the power
on icon on the toolbar. If you select a group of projectors, all projectors in the group are powered on.
(2) Power Off
Select [Control]  [Power OFF] to turn off the power. You can also turn off the power by clicking the power
off icon on the toolbar. If you select a group of projectors, all projectors in the group are powered off.
(3) Command No.1-10
Select [Control]  [Execute Command] to execute a command.
(4) Schedule
Only Power On / Off commands are allowed as the schedule event for User-defined model.
3.26 Open the build-in HTML page in the projector
You can access the projector built-in HTML page from PJMan directly. Select the projector from the tree view,
and then go to [Option]  [Open with] from the menu. The default browser on your computer will launch
automatically and access the selected projector HTML page. This function supports embedded network
projector models only.
© 3M 2012. All Rights Reserved.
80