Mail Setting - 3M WX36 Application Manual

3.23 Mail Setting

A notification mail will be sent when any error or selected condition occurs. Select [Option]  [Mail Settings] to
open the mail settings dialogue.
(1) Mail Settings
Mail Settings dialog is as follows.
Send Mail
SMTP Server
From Address
Send Address
Subject
Mail Text
Attach File
Mail Send Test
(2) Mail Address Settings
Mail Address Setting dialogue is as follows.
Mail Address --- Enter the mail address to be sent, up to
[TO][CC][BCC]: Select TO / CC / BCC.
Notification --- Chose the Error / Alarm to send the mail.
[Select All]:
[Release All]: Turn all the check box OFF.
© 3M 2012. All Rights Reserved.
--- Enable / Disable send mail function.
--- Enter the SMTP Server.
--- Enter the sender's mail address.
--- Enter the receiver's mail addresses up to 10 addresses.
[Add]: Add a receiver's mail address.
[Delete]: Delete a receiver's mail address.
[Edit]: Edit receiver's mail address.
--- Enter the subject.
--- Mail Text Setting screen appears to set the mail message.
--- Enter the file name of attached file (optional).
[Browse] File dialogue appears.
:
--- Send a test mail.
256 characters.
Turn all the check box ON.
74