3M WX36 Application Manual page 55

[SETUP] Tab
Function
Auto Keystone
Keystone V
Keystone H
Perfect Fit
Auto Eco Mode
Eco Mode
Mirror
Standby Mode
Monitor Out - Computer in1
Monitor Out - Computer in2
Monitor Out - LAN
Monitor Out - USB type A
Monitor Out - USB type B
Monitor Out - HDMI
Monitor Out - Component
Monitor Out - S-Video
Monitor Out - Video
Monitor Out - Standby
Reset
© 3M 2012. All Rights Reserved.
General Description
[Execute]: Performs the automatic keystone distortion correction.
Corrects the vertical keystone distortion.
[-]: Decrease the vertical keystone value.
[+]: Increase the vertical keystone value.
Corrects the horizontal keystone distortion.
[-]: Decrease the horizontal keystone value.
[+]: Increase the horizontal keystone value.
[Settings...]: Displays the Perfect Fit dialog.
Turns on/off the auto eco mode.
On / Off
Turns off/on the eco mode.
Normal / Eco
Switches the mode for mirror status.
Normal / H:Invert / V:Invert / H&V:Invert
Switches the standby mode setting.
Normal / Saving
Assigns the MONITOR OUT when the COMPUTER IN1 input port is selected.
Computer in1 / Off
Assigns the MONITOR OUT when the COMPUTER IN2 input port is selected.
Computer in2 / Off
Assigns the MONITOR OUT when the LAN input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE A input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the USB TYPE B input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the HDMI input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the COMPONENT input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the S-VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT when the VIDEO input port is selected.
Computer in1 / Computer in2 / Off
Assigns the MONITOR OUT in the standby mode.
Computer in1 / Computer in2 / Off
Initialize the selected function.
Keystone V / Keystone H
[Execute]: After the confirmation message, the selected function will be initialized.
55