3M WX36 Application Manual page 41

X30N / X35N / X35NK
[STATUS] Tab
Function
Power
Input Source
Error Status
Blank On/Off
Mute
Freeze
Lamp Time
Filter Time
Reset
[PICTURE] Tab
Function
Brightness
Contrast
Gamma
Color Temp
Color
Tint
Sharpness
Active Iris
My Memory
Reset
© 3M 2012. All Rights Reserved.
General Description
Displays the current power status.
On / Standby / Cool down
Displays the current input source.
Computer in1 / Computer in2 / Component / S-Video / Video
Displays the current error status.
Normal / Cover Error / Fan Error / Lamp Error / Temp Error / Air Flow Error / Cold Error /
Filter Error / Other Error
Displays the current blank on/off status.
On / Off
Displays the current mute status.
On / Off
Displays the current freeze status.
Normal / Freeze
Displays the usage time for the current lamp.
Displays the usage time for the current filter.
Initialize the selected function.
Lamp Time / Filter Time
[Execute]: After the confirmation message, the selected function will be initialized.
General Description
Adjusts the brightness.
[-]: Decrease the brightness value.
[+]: Increase the brightness value.
Adjusts the contrast.
[-]: Decrease the contrast value.
[+]: Increase the contrast value.
Switches the gamma mode.
#1 Custom / #2 Custom / #3 Custom / #4 Custom / #5 Custom / #6 Custom / #1 Default /
#2 Default / #3 Default / #4 Default / #5 Default / #6 Default /
Switches the color temperature mode.
High / Mid / Low / Hi-Bright-1 / Hi-Bright-2 / Hi-Bright-3 / #1 Custom / #2 Custom / #3 Custom /
#4 Custom / #5 Custom / #6 Custom
Adjusts the strength of whole color.
[-]: Decrease the color value.
[+]: Increase the color value
Adjusts the tint.
[-]: Decrease the tint value.
[+]: Increase the tint value.
Adjusts the sharpness.
[-]: Decrease the sharpness value.
[+]: Increase the sharpness value.
Changes the active iris control mode.
Presentation / Theater / Off
Loads the data from the memory.
Load1 / Load2 / Load3 / Load4
Saves the current adjustment data into the memory.
Save1 / Save2 / Save3 / Save4
[Execute]: Performs each function.
Initialize the selected function
Brightness / Contrast / Color / Tint / Sharpness
[Execute]: After the confirmation message, the selected function will be initialized.
41