(2) Communication Settings
RS-232C
bits/s
Data bits
Parity
Stop bit
Flow Control
Network
(3) Command Definitions 1
Name
Command
© 3M 2012. All Rights Reserved.
--- COM port parameter setting (if RS232C uses)
--- Baud rate
--- Data bit
--- Parity bit
--- Stop bit
--- Flow control
--- Select network protocol (TCP or UDP)
--- Enter the name of command, up to 32 ASCII characters.
--- Define the command up to 32 ASCII characters.
The allowed characters are depending on the command type selection (binary or Text) on
the General Setting TAB.
78