Item
Access Type
In the list, select the access rights to the community.
• Not Accessible
• read-only
• read-write
• trap
Protocol, Active/
Configure settings for each protocol used by the community.
Inactive
Manager Address
Enter the host computer's address according to the protocol in use.
Configuring the Administrator Password
Click [Administrator Settings] to specify the administrator password.
Administrator Settings
Item
Current Password
Enter the current administrator password. The default is "admin133".
New Password
Enter the new administrator password. You can enter it using three to eight
characters.
Confirm Password
Enter the same password again, to confirm.
No access permitted.
You can read the information, but not edit it.
You can read and edit the information.
Notifies the manager with information about errors. Enter the recipient of
the error notification in the Manager Address box.
Using Web Image Monitor
Description
Description
139