Ricoh Aficio SP 204SN User Manual page 138

8. Configuring the Machine Using Utilities
Configuring the IPv6 settings
Click [IPv6] to display the page for configuring the IPv6 settings.
IPv6
Item
IPv6
Ethernet
Item
Host Name
Domain Name
Link-local Address
Stateless Address
Manual
Configuration
Address
136
Select whether IPv6 is active or inactive.
Enter the host name you want to set for the network interface board, using up to
63 characters. The default is RNP, followed by the MAC address of the active
interface board. If you change the name to other than the default, the new name
cannot begin with "RNP" or "rnp".
Enter the name of the domain to which the device belongs, using up to 63
alphanumeric characters.
Displays the link-local address of the network interface board.
The link-local address applies only within the local network (local segment) and
begins with "fe80::", followed by an identifier generated from the MAC address
of the active interface board.
Displays the stateless address for router.
In the left box, enter the IPv6 address assigned for the network interface board.
In the right box, enter the prefix length of the IPv6 address, using a value
between 0 and 128. The default is 64.
• The following addresses cannot be set:
Link-local addresses, multicast addresses, loopback addresses, IPv4-
compatible addresses, and IPv4-mapped addresses
Description
Description