Ricoh Aficio SP 204SN User Manual page 139

User guide
Hide thumbs Also See for Aficio SP 204SN:
Table of Contents

Advertisement

Item
DHCPv6
Select [Enable] to use the DHCPv6 server to automatically configure the
network settings. Select [Disable] to manually configure the network settings.
DDNS
Select whether DDNS (Dynamic DNS) name resolution for the network interface
board is active or inactive.
When active, the DNS database is immediately updated.
Details
Item
Default Gateway
Enter the default gateway address.
Address
The default gateway address is the IP address of the host or router used as the
gateway when communicating (printing or exchanging information) with a
computer on another network.
When using DHCP, the default gateway address obtained from the DHCP
server is used. If the address cannot be obtained from the DHCP server, the
default gateway address set for the device is used.
DNS Server
Select whether to use the DNS server obtained from the DHCP server, or the
DNS server set for the device.
DHCPv6 Mode
Select an operation mode for DHCPv6.
• DHCPv6
• DHCPv6-lite
IAID
IAID is ID to identity IPv6 address and it is needed for acquiring reserved IPv6
address.
LPR
Select to enable network printing using LPR/LPD.
RAW
Select to enable network raw printing.
IPP
Select to enable network printing using Internet Print Protocol.
Operates in DHCPv6 mode.
Obtains the IPv6 address and other parameters.
Operates in DHCPv6-lite mode.
Obtains parameters except the IPv6 address.
Using Web Image Monitor
Description
Description
137

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sp204sfSp204sfn

Table of Contents