Collate; Duplex Printing - Kyocera TASKalfa 2551ci Driver Manual

Quick Print

Collate

Duplex Printing

4-2
Collate specifies the order in which the pages of a multiple copy job are printed.
With Collate on, the first time the print job is sent to the printing system the data
is rendered as page images in the printing system's memory. The remaining job
copies are printed from the stored data. This avoids the extra processing
involved in sending every copy from the computer to the printing system.
Click the Collate icon to change between on and off.
With Collate on, the driver prints the complete job set by set (123, 123). With
Collate off, it prints each page by set (111, 222). For example, with Collate on,
three copies of a five-page document output as pages one through five in
succession, three times.
The printer driver automatically overrides the application's Collate setting and
uses the printer driver setting. You can use the application's Collate setting by
clearing the Ignore application collation check box in the Compatibility
Settings dialog box accessed from Device Settings.
If Collate: On (reverse order) is selected, the printed pages appear in reverse
order (321, 321). This option is available when Printer default is not selected
under Destination in the Basic tab.
Duplex printing is printing on both sides of each page. The printing system
contains a duplex unit that turns the paper over to allow printing on the reverse
side. Flip on long edge or Flip on short edge must be selected to print on both
sides of the cover and insert pages.
Flip on long edge
Turn the long edge of the page to view the content.
Flip on short edge
Turn the short edge of the page to view the content.
Flip on long edge
User Guide