Stapling A Print Job; Finishing Edge; Finishing Edge Combinations; Setting The Finishing Edge - Kyocera TASKalfa 552ci User Manual

Stapling a Print Job

1
2
3
4

Finishing Edge

Finishing Edge Combinations

Setting the Finishing Edge

1
KX DRIVER
The Staple feature in the Finishing tab lets you create stapled document sets.
You must first select a finisher under Device options in Device Settings.
Staple makes Separation and Transparency interleaving unavailable. The
maximum number of sheets depends upon the finisher model and the selected
Page size or Media type. The Gutter feature lets you increase the top and left
margins to accommodate the location of the staples.
In the Finishing tab, select Staple.
In the Staple feature, select Position and Count. Two options are available for
count: All sheets up to the limit displayed in the tab, and every number of pages
so that each number set is stapled separately. The Position setting options
vary based on settings in Finishing edge, which provides custom staple
locations in the document.
Click OK to return to the Print dialog box.
Click OK to start printing.
Finishing edge aligns the matching sides of two different page sizes in a
document. For example, the long edge of an A4 page is aligned with the short
edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the
staple and punch feature.
You can choose the position of staples in a document composed of mixed page
sizes. In contrast, if you are printing a mixed page size document without using
Finishing edge, staple positions depend on the paper size settings (portrait or
landscape) in the paper cassettes.
Finishing edge should be selected before any other features in the Finishing
tab. If set last, Finishing edge might change any settings that you previously
made under Staple or Punch.
Selecting Finishing edge makes some other features unavailable, such as
Separation and Rotated. Finishing edge cannot be used with the Poster
feature.
Finishing edge can be used with the following page size combinations:
A4 and A3 (210 x 297 mm and 297 x 420 mm)
B5 (JIS) and B4 (182 x 257 mm and 257 x 364 mm)
Letter and Legal (8.5 x 11 in. and 8.5 x 14 in.)
Letter and Ledger (8.5 x 11 in. and 11 x 17 in.)
16K and 8K (197 x 273 mm and 273 x 394 mm)
You can align the matching sides of two different page sizes in a document.
In the Basic tab, set Print size and Page size to the same size.
Finishing
6-3