Send Application Name; Associate Profile With Application; Password Protect Administrator Settings; Hide Factory Default Profile - Kyocera TASKalfa 2551ci Driver Manual

Device Settings

Send Application Name

Associate Profile with Application

Password Protect Administrator Settings

Setting the Administrator Password
1
2
Clearing the Administrator Password
1
2
3

Hide Factory Default Profile

3-5
This option lets you send the application name with a print job, so that a
different printing process is used for each application.
This option is unavailable when PDF is selected as the PDL.
To enable this feature, in Device Settings > Administrator > General, select
Send Application name.
This option lets you set all printing from each installed application to use the
same driver settings as defined in a profile. Before using this feature:
A profile must be created in the Profiles dialog box, accessed from any
Printing Preferences tab.
An association must be created between a profile and an application in the
Application Based Printing dialog box, accessed from the Profiles dialog
box.
This feature is enabled by default. To disable this feature, in Device Settings >
Administrator > General, clear the Associate Profile with application check
box.
Note: Application Based Printing is only available for 32-bit operating
systems.
You can set Password protect administrator settings in the Administrator
Settings dialog box to prevent unauthorized changes in this dialog box. If
selected, this setting prompts you to enter a password and confirm the
password. This password protection blocks access to all Administrator
Settings options.
In Device Settings > Administrator > General, select Password protect
administrator settings.
In the Password dialog box, enter a password, using at least 4 and no more
than 16 characters. Reenter the password in Confirm password and click OK.
In Device Settings, click Administrator.
In the Enter Password dialog box, type the password and click OK.
In the Administrator Settings dialog box, clear the Password protect
administrator settings check box and click OK.
This option lets you hide or show the Factory Default profile in the Quick Print
tab and the Profiles dialog box.
Check box selected: The Factory Default profile does not appear in the lists.
User Guide