Rotate Copies; Finishing Edge - Kyocera TASKalfa 2551ci Driver Manual

Finishing
Offsetting Jobs
1
2
3

Rotate Copies

Rotating Copies
1
2
3
4
5

Finishing Edge

7-2
You can offset, or shift each print job in the output tray.
In Finishing > Separation, click the Offset jobs icon.
Click OK to return to the Print dialog box.
Click OK to start printing.
Rotate copies stacks each copy of a print job at a right angle in the output tray.
If Collating by job is set to On at the printing system, the Rotate copies setting
in the driver is ignored.
This feature requires the following:
Paper size selections are limited to Letter, A4, 16K, or B5 (JIS).
The selected paper size must be loaded into two paper sources, one
horizontally and one vertically.
The print job must contain multiple pages and be specified to print multiple
copies.
You can stack each copy of a print job at right angles in the output tray.
In Basic > Destination, select an option that is not a finishing tray, for example:
Printer default.
Select a number of copies greater than 1.
In Finishing > Separation, click the Rotate copies icon.
Click OK to return to the Print dialog box.
Click OK to start printing.
Finishing edge aligns the matching sides of two different page sizes in a
document. For example, the long edge of an A4 page is aligned with the short
edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the
staple or punch features.
You can choose the position of staples in a document composed of mixed page
sizes. In contrast, if you are printing a mixed page size document without using
Finishing edge, staple positions depend on the paper size settings (portrait or
landscape) in the paper cassettes.
Finishing edge should be selected before any other features in the Finishing
tab. If set last, Finishing edge might change any settings that you previously
made under Staple.
User Guide