Collate/Offset - Kyocera TASKalfa 6003i Operation Manual

Using Various Functions > Functions

Collate/Offset

Org./Paper/
Copy
Finishing
Offsets the output by page or set.
Item
Collate
Offset Without Document Finisher (Option)
With Document Finisher (Option)
*1 If [Off] is selected for "Collate" setting, [Each Page] appears. When [On] is selected, [Each Set] appears.
Functions
Custom
Box
Image
USB Functions
Drive
Scans multiple originals and delivers complete sets of
copies as required according to page number.
Printed copies are produced after rotating each set (or
*1
page ) by 90 degrees.
NOTE
To use offsetting, the same size of paper as the selected
paper tray must be loaded in a different orientation in a
different paper tray.
The paper sizes supported in Offset: A4, B5, Letter and
16K.
Printed copies are segregated after each set of copies (or
after each page
NOTE
• The optional Document Finisher is required.
Inner Finisher (page 11-26)
1,000-sheet Finisher (page 11-27)
4,000-sheet Finisher (page 11-28)
100-sheet Staple Finisher (page 11-29)
• The paper sizes supported in Offset: A3, A4, B4, B5,
216×340 mm, Ledger, Letter, Legal, Oficio II, 8K and
16K.
6-26
Description
*1
).